Welcome to LC heating!

contact us info@lcheating.com

PTC Heating Element OEM Supplier
PTC Heating Element
Contact US
7*24 Online
Previous slide
Next slide

PTC air heater for central air conditioning

Inquiry

Surface uncharged PTC heater series.

Surface non-electric PTC heater is a kind of high-power PTC heater which needs to blow air and the heat sink is not electrically charged. PTC element is installed in aluminum tube and insulated with aluminum tube, and the aluminum tube is equipped with fins or grooved heat sinks outside the tube. It has the advantages of safety and reliability, stable power, no noise, long life and good mechanical strength. Due to the good safety performance, it is mainly used in high-power household heating devices such as air conditioners, heaters, sterilizers and dryers.

Characteristic

PTC air heater adopts PTCR thermal ceramic element, which is composed of a number of monolithic combinations and corrugated heat dissipation aluminum strips bonded by high temperature adhesive, and has the significant advantages of small thermal resistance and high heat transfer efficiency. Its most important feature lies in its security, that is, in case of fan failure blocking, PTC heater because of insufficient heat dissipation, the power will automatically drop dramatically, at this time, the surface temperature of the heater to maintain a limit in the Curie temperature or so (generally 220 ℃), so as not to produce the heater surface of electric heaters, “red” phenomenon, to rule out the potential danger of accidents. The hidden danger of accidents.

Precautions for use

1.The power of PTC air heater is greatly affected by the external environment; the ideal test method is to be installed in the whole machine under standard working conditions. Usually, in order to facilitate the inspection and confirmation of both sides, the actual operation is to adjust the relevant parameters of the simulated air ducts with the sealed samples confirmed in the whole machine and then tested. Test the ambient temperature is generally maintained at about 25 ± 2 ℃.

  1. PTC air heater in the work of thermal expansion phenomenon, so in the structural design should be considered around the heater to leave a certain gap (more than 5mm);
  2. The design should also consider anti-electrocution measures and evaporator frost safety spacing, to ensure that there is no human body, metal objects and the possibility of touching the frost layer. Selection of surface insulation type heater is safer;
  3. The heater is installed to connect the three-phase power supply, should be Y-type connection, and the neutral point must be connected to the zero line, to avoid the three-phase imbalance caused by the heater end of the road too high a voltage fault hidden danger!

Specification

modellength(mm)width(mm)height(mm)power(KW)voltage(VAC)
ZY-1320260282~4208~460
ZY-2402320287~10.5208~460
ZY-38835544010~30208~460
ZY-413207164030~45208~460
ZY-514357164050~70208~460

 Double-layer heater product features:

1, double-layer heater structure, can obtain greater power density and outlet temperature.

2, the integrated radiator structure, not only beautiful appearance, heat transfer efficiency is higher.

3, In the absence of wind or overheating, the thermostat will act. After the fault is removed, the thermostat can be manually reset.

4, special processing technology, making power aging smaller.

Speicification

modellength(mm)width(mm)height(mm)power(KW)voltage(VAC)
ZYS-17KW-220VAC107047615017220
ZYS-30KW-220VAC107081265030220
ZYS-19KW-220VAC108064415019220
ZYS-40KW-380VAC15806605040380
ZYS-50KW-380VAC21806605050380
ZYS-60KW-380VAC27806605060380
Scroll to Top